ZERO OHM JUMPERS RESISTORS,SWR0J-3ST zero ohms jumper resistor series is a SOT 23 ZERO OHMs all shorted JUMPER network has 2 zero ohms jumpers. Other zero ohms resistors jumper arrays available in DIP, QSOP,SOIC,TSSOP compatible with PRN 146, PRN 147 and other. Isolated Zero Ohms Jumpers crossovers surface mount network array. Semiconwell's integrated isolated Zero ohms Jumper arrays networks are designed to be used in a wide range of applications including PC Board crossovers, permanent jumpers, program, customize or alter functionality of a PC Board. Due to a very low capacitance between jumpers, these can be used also on high-speed data lines. The R0J series solution saves board space, improves PC Board performance and reduces assembly cost on passive components. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883.

 
 
SEMICONWELL
Integrated Passive Networks
  ZERO OHMS JUMPERS
SW R0J-3ST
 
 

FEATURES
APPLICATIONS
SCHEMATIC
10 mOhms jumpers network
Y connected jumpers
Available in standard 3 pin SOT-23
Custom configurations are available
Alter PC Boards functionality
Programmable Circuit interconnect
PC Boards crossovers
zero ohms jumpers array SWR0J-8

SHORT PRODUCT APPLICATION NOTE
Semiconwell's integrated isolated Zero ohms Jumper arrays networks are designed to be used in a wide range of applications including PC Board crossovers, permanent jumpers, program, customize or alter functionality of a PC Board. Due to a very low capacitance between jumpers, these can be used also on high-speed data lines. The R0J series solution saves board space, improves PC Board performance and reduces assembly cost on passive components. These devices can be used over the full military temperature range -55°C to +125°C. Quality and workmanship is per MIL-S-883.

SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION
Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1 Ω/sq to 10,000 Ω/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern.

JUMPER SPECIFICATIONS
DC Resistance [Ω] Power Rating [mW]
0.010±20% 250 mW@70°C

Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

GENERAL DIE INFORMATION
Substrate Thickness (mils) Die size (mils) Bonding pads Backside metal
SiO2 / Silicon 10±2 30 x 30 ±3 4x4 mils, 3µm thick, 99.99% electroplated gold with a TiW barrier Au/Si compatible with eutectic and conductive epoxy die attach.
All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products.

CONDUCTORS BACKSIDE METAL
The bonding pads of the ZERO OHMS resistors are 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. Backside of the die is metallized with standard Si/Au compatible with eutectic and epoxy die attach. Custom metallizations are available upon special request for die products only.

DIE LAYOUT PACKAGE PIN OUT
zero ohms jumpers array SWR0J-8
SHORTED PINS = (1, 3); (2, 3)

STANDARD PRODUCTS ORDERING INFORMATION

SOT-23 SOT323 SC70-3 BARE DIE-3
SWR0J-3ST SWR0J-33ST SWR0J-3SC SWR0J-3BD

SW PART # QUANTITY SOT23 U/P($) SOT323 U/P($) SC70-3 U/P($) BARE DIE U/P($)
SWR0J   5,000pc -3ST 0.269 -33ST 0.269 -3SC 0.269 -3BD n/a
SWR0J 10,000pc -3ST 0.252 -33ST 0.252 -3SC 0.252 -3BD n/a
List prices are for standard products, available from stock. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order. For custom products please inquire by contacting SEMICONWELL technical sales. No rights can be derived from pricing information provided on this website. Such information is indicative only, is showed for budgetary use only and subject to change by SEMICONWELL at any time and without notice.
For custom products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact sw_sales@semiconwell.com

INSTANT QUOTE
Semiconwell P/N Quantity E-mail    
 

Delivery for standard products is 4-6 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts.

Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

SEMICONWELL has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONWELL for its use, nor for any infringements of rights of third parties which may result from its use. SEMICONWELL reserves the right to revise the content or modify its product line without prior notice. SEMICONWELL products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.

Home Product Tree Tech. Support Print PDF Packages Request Quote Inventory Place Order Contact sales

Last update: July 18, 2013
SEMICONWELL Tel:(408)758-8692 Fax:(408)986-8027
©1990-2014 SEMICONWELL All rights reserved. No material from this site may be used or reproduced without permission.