Filters at source of emissions. Stable resistor-capacitor network. Ideal for high-speed logic. Low lead inductance. Reduces board space compared to discretes. 3-Pin SOT-23 package. Clock termination. Point of contact filtering. Low Pass Filter. EMI/RFI filtering. High speed microprocessor systems like Intel's Pentium, DEC's Alpha, Motorola's 68K and PowerPC , Sun's SPARC, MIPs, and other RISC-based system require well-controlled and precise closk signals to maintain a high performance synchronoussystem. However, very fast edge rated clock signals exhibit transmission line effects on the clock lines resulting in undershoot and overshoot disturbances. CAMD's SWCKT resistor-capacitor integrated thin film networks are specifically designed to eliminate lines. They are effective in suppressing EMI/RFI noise at I/O ports and can also be used as "distributed" AC terminators when filtered lines are dispersed across the board. These networks are fabricated on a silicon substrate using advanced thin film technology. They have low parasitic inductance compared to discrete and conventional thinck film filters and provide effective AC termination and EMI/RFI noise suppression over a wide range of frequencies. The SWCKT is an integrated RC network fabricated on a silicon substrate using advanced thin film technology. This technology insures a fixed time constant and does not create additional skew on the clock lines. It offers very low parasitic inductance compared to conventional discrete thick film-based approaches and provides effective termination at high frequencies. Semiconwell manufactures passive network components, integrated active and passive devices, resistor networks, capacitor networks, schottky and zener diode networks, and npn, pnp transistors arrays that perform the following functions: series and parallel linear and nonlinear GTL, AC, Diode, Thevenin termination networks, precision thin film resistor capacitor networks (RC networks), isolated, bussed resistor networks including zero ohms jumper arrays, voltage divider networks, resistor networks for audio applications, EMI, RFI and ESD zener clamped diodes and transient voltage suppressors networks, EMI/RFI filter networks and clock terminations. Semiconwell's proprietary semiconductor technology, advanced thin films processes, in house assembly and packaging technologies allow manufacturing of flip chip CSP chip scale and MLF molded lead frame surface mount integrated passive networks that include unprecedented large capacitors >1microfarad (1µF) and giga ohms resistors (GW). Generic Edit Space CLOCK TERMINATIONS PASSIVE NETWORKS SW CLOCK TERMINATIONS PASSIVE NETWORKS SWCKT-1RC 1LINE CLOCK TERMINATOR AND FILTER SWCKT-5RC - 5 LINES CLOCK TERMINATOR AND FILTER SWCKT-2RC - 2 LINES CLOCK TERMINATOR AND FILTER SWCKT-6RC - 6 LINES CLOCK TERMINATOR AND FILTER SWCKT-3RC - 3 LINES CLOCK TERMINATOR AND FILTER SWCKT-7RC - 7 LINES CLOCK TERMINATOR AND FILTER SWCKT-4RC - 4 LINES CLOCK TERMINATOR AND FILTER SW CLOCK TERMINATIONS PASSIVE NETWORKS

 
 
SEMICONWELL
Integrated Passive Networks
  CLOCK TERMINATION AND FILTER
SWCKT-2RC/XXX/XXX
 
 

FEATURES
APPLICATIONS
SCHEMATIC
Filters at source of emissions.
Stable resistor-capacitor network.
Ideal for high-speed logic.
Low lead inductance.
Reduces board space compared to discretes.
3-Pin SOT-23 package.
Clock termination.
schematic

SHORT PRODUCT APPLICATION NOTE
High speed microprocessor systems like Intel's Pentium, DEC's Alpha, Motorola's 68K and PowerPC , Sun's SPARC, MIPs, and other TISC-based system require well-controlled and precise closk signals to maintain a high performance synchronous system. However, very fast edge rated clock signals exhibit transmission line effects on the clock lines resulting in undershoot and overshoot disturbances. CAMD's SWCRT 1RC resistor-capacitor integrated thin film networks are specifically designed to eliminate lines. They are effective in suppressing EMI/RFI noise at I/O ports and can also be used as "distributed" AC terminators when filtered lines are dispersed across the board. These networks are fabricated on a silicon substrate using advanced thin film technology. They have low parasitic inductance compared to discrete and conventional thick film filters and provide effective AC termination and EMI/RFI noise suppression over a wide range of frequencies. The SWCKT is an integrated RC network fabricated on a silicon substrate using advanced thin film technology. This technology insures a fixed time constant and does not create additional skew on the clock lines. It offers very low parasitic inductance compared to conventional discrete thick film-based approaches and provides effective termination at high frequencies.

SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION
Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1 W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern.

ABSOLUTE MAXIMUM RATINGS
Capacitor BV Max. Operating Temperature Package Max Power Rating Resistor Max Power Rating
50V 125°C 1000mW@70°C 100mW@70°C/Resistor

Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

ELECTRICAL CHARACTERISTICS
PARAMETER VALUE UNITS
Resistance Range 15...100 W
Capacitance Range 10 ... 100 pF
Absolute Tolerance (R) ±10 %
Absolute Tolerance (C) ±20 %
Operating Temperature (TOP) -55 to 125 °C
Storage Temperature (Tstg) -60 to +150 °C
Power Rating/Resistor 100 mW
Package Power Rating 1 W

GENERAL DIE INFORMATION
Substrate Thickness (mils) Die size (mils) Bonding pads Backside metal
SiO2 / Silicon 10±2 36 x 27 ±3 4x4 mils, 3mm thick, 99.99% electroplated gold with a TiW barrier Au/Si compatible with eutectic and conductive epoxy die attach.
All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products.

CONDUCTORS RESISTORS CAPACITORS
The bonding pads of the resistors are 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. Resistive material is ultra stable TaN with low TCR<75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. Power rating/resistor max 100mW for R<1KW and 25mW for R>1KW. Standard tolerance is ±5%. Silicon nitride dielectric, MNOS capacitors exhibit high stability, low temperature coefficients, low leakage <10nA and high BV>50V.

DIE LAYOUT PACKAGE PIN OUT
die layout schematic
Vin=1,2
Vss=die backside
Vss=3
Vdd=2,7,10,15

STANDARD PRODUCTS ORDERING INFORMATION

R (W) C (pF) fc@3dB (MHz) SW PART# SOT23 BARE DIE
33 47 103 SWCKT2RC330/470 SWCKT2RC330/470-SOT23 SWCKT2RC330/470-BD
47 47 72 SWCKT2RC470/470 SWCKT2RC470/470-SOT23 SWCKT2RC470/470-BD
47 33 103 SWCKT2RC470/330 SWCKT2RC470/330-SOT23 SWCKT2RC470/330-BD
50 68 47 SWCKT2RC500/680 SWCKT2RC500/680-SOT23 SWCKT2RC500/680-BD
75 50 42 SWCKT2RC750/500 SWCKT2RC750/500-SOT23 SWCKT2RC750/500-BD
100 100 16 SWCKT2RC101/101 SWCKT2RC101/101-SOT23 SWCKT2RC101/101-BD
40 50 80 SWCKT2RC400/500 SWCKT2RC400/500-SOT23 SWCKT2RC400/500-BD
50 100 32 SWCKT2RC500/101 SWCKT2RC500/101-SOT23 SWCKT2RC500/101-BD

SW PART # QUANTITY SOT-23 U/P($) BARE DIE U/P($)
SWCKT2RC 10,000pc -SOT23 $0.320 -BD $0.360
SWCKT2RC 25,000pc -SOT23 $0.304 -BD $0.344
For products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact sw_sales@semiconwell.com

  Semiconwell P/N Quantity E-mail    
Receive Instant Quote
 

Delivery for packaged standard products is 4-6 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts.

Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

SEMICONWELL has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONWELL for its use, nor for any infringements of rights of third parties which may result from its use. SEMICONWELL reserves the right to revise the content or modify its product line without prior notice. SEMICONWELL products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.

Home Product Tree Tech. Support Print PDF Packages Request Quote Inventory Place Order Contact sales